Construction of gazebos
Before the construction of the gazebo is important to determine the exact location will place it. Depending on the size that is chosen, shall take appropriate measures so that when the columns are placed, they correspond to the boards and beams that must be placed on the roof. Then, label the point on the floor just where to go each of the four columns (in this case is a square gazebo), and should not forget to draw a right angle between the marks, as this Thus, the gazebo will be completely straight.
gazebo construction
Once drawn and the four points where the poles will be carried out holes on the wooden floor panel. These holes must have a perimeter which fits snugly in each column. Columns would be placed in its corresponding hole and two round head screws inserted in a diagonal direction, is fixed to the beam that holds the soil below. We recommend using the water level to verify that they are straight, so avoid that in future the gazebo could collapse.
Construction of gazebos
Once all these steps are involved in the placement of the stringers whose main function is to make the connection between the columns and also to hold the amount to be posted later. To make the union of the crossbar with each of the posts should be used to drill twice each, and so round head screws placed in pairs.
With regard to the location of the studs, allow exactly the same space between each, making sure they are straight, they will be attached to the studs with round head screws. Finally, everything will be fixed with screws, however, blocks fasteners eliminate the need for nailing obliquely. These blocks shall be placed parallel to the joists and perpendicular to the studs.