As a curtain shortening
To cut a curtain will need these tools:
- scissors
- one meters
- pins
- wire
- needle or a sewing machine
1. Hang the curtain in the place where you would go located.
2. Take the necessary hem leaving a finger to the floor above the ground.
3. Remove the curtain and place it on a flat surface to measure the hem with the metro.
4. Measure along the curtain on several sites to make it straight and fasten with pins (if very large dobladilli cut with scissors before fastening with pins).
5. Sewing by hand or by machine (it’s best if hand sewing the hem is very large – see photo).
6. We recommend placing the curtain with the pins before cutting or sewing to see if it has taken proper measures.
How to place a curtain
To place a curtain need these tools: a drill or a hammer or level and meter.
Before buying the curtain has to measure the width of the window and add a few inches on each side to cover tightly around the window and its frame.
Make the holes with the drill to suit adequado and do not forget to use the level (very important in that it is not twisted the curtain).
For this curtain made 4 holes. Inside each hole is placed after a block for screw fastening. Drop the subject of the curtain and placed in the heel with a screw. These curtains have a guide to run after the window can focus.